top of page

HOME  >  PRODUCTS   >                                      >   UV LAMP

Logo Laffi Water

UV LAMP

PRESENTATION

The UV System is a modern and efficient water disinfection solution that effectively combats microbial contamination by inactivating bacteria, viruses and other pathogenic organisms, preventing them from reproducing and causing other health risks. The result of this treatment is drinking water, healthy and safe.

Disinfecting drinking water using ultraviolet light is an exceptionally effective, environmentally safe and fully proven means.

The Ultraviolet System leaves no residual, it is not necessary to handle chemical products and it is a means of low maintenance and operation, in addition to easy installation.

The equipment also provides an electrical panel to control operating days, thus indicating the useful life of the UV lamp. Very low replacement cost. Requires little operational care.

Disinfection occurs naturally without the use of chemicals, such as chlorine, which can react with organic material, producing unpleasant taste and odor and several by-products.

APPLICATIONS

  • When the process requires the need for disinfection, oxidation and reduction of TOC;

  • Cosmetics Manufacturing;

  • Manufacturing of Medicines and Medicines;

  • Manufacture of concentrated juices;

  • Laboratories;

  • Protection of UV or DI system;

  • Mineral water;

  • Disinfection after dechlorinated water (Carbon filter outlet);

  • Manufacture of water-based paints and pigments;

  • Beverage, food industries;

  • Reduction of organic load;

  • Production of pure or ultrapure water;

  • General processes;

SPECIAL REQUIREMENTS

  • Recommended Pre Treatment: Suspended Solids - Bag filter; Cartridge filter; Zeolite filter; Sand / Hardness Filter - Softener / Oxidized Iron Filter - Zeolite Filter / Color and Turbidity - Sand Filter, Carbon Filter, Zeolite Filter

  • Maintenance: Replacement of the UV lamp every 365 days, Quartz Tube only when damaged, Electrical panel only when damaged.

KNOWING THE PRODUCT

Como funciona a Lâmpada UV
Índice de Raio UV

PROJECT DATA

  • Working pressure: 0.5 ~ 9.0 kgf / cm²

  • Flow rate: 0.1 ~ 6.0 m³ / h

  • Connections: 1/4 "~ 1.1 / 2"

  • Excess UV Dosage (uW-sec / cm2)> 30,000

  • Electrical Requirements (V) 110 or 220

  • Power (W) 14/39/78/156

  • Panel with hour meter depending on model

  • Minimum Conditions for Installing the UV System: Iron: <0.3 mg / l / Total Hardness (calcium and magnesium): <120 mg / lCaCo3 / Turbidity: <0.1 NTU / Manganese: <0.05 mg / l / Minimum transmittance: 75%

CONSTRUCTION MATERIAL

  • 304L stainless steel

PHOTO GALLERY

DISCOVER ALL OUR PORTFOLIO